01432 610152 Get a quote Call 01432 610152

Roofers in Clows Top

Roof repairs and re-roofs in Clows Top, the hamlet in the south-east of Bayton parish.

We look first at the gable edges, photograph each fault, and send you a single written total price.

Get a free quoteCall 01432 610152

Gable edges, tiled slopes and a listed farmhouse

  • Older cottages with weathered clay tile roofs and brick chimneys behind a flint wall
    Gable vergesBedding at the gable edge cracks and drops out, leaving end tiles loose.
  • Slate roofs and chimney stacks along a red brick Victorian terrace
    Tiled slopesTiles that crack or slip leave the timber battens exposed to rain.
  • Newer homes with grey concrete tile roofs along a curving estate road
    Foxley Farmhouse, Grade IIThe nearest list entry to Clows Top is Foxley Farmhouse, number 1081402.

Clows Top on the map

Clows Top on a street map, with a dashed circle around the town and the nearest towns we cover. Tiles © Esri; map data © Esri, HERE, Garmin, OpenStreetMap contributors.

Clows Top roofs, verge to roof window

Gable edge, tiled slope and roof window: three callouts on a Clows Top roof

Our Clows Top survey goes to the gable first, where the covering runs out at the verge, then crosses the tiled slope itself, and ends at the roof window or extension that an owner may be planning.

A drawn cut-away section through a Herefordshire border house: the front of the main roof is cut open to show the rafters, underlay, battens and slates, beside a black-and-white timber-framed gable. Numbered, from the ridge down: 1 Gable verge; 2 Tiled slope; 3 Roof windows.

Fig. 1 A Clows Top roof opened up: gable verge, tiled slope and roof window.

Callout 1 of 3

The gable verge and its end tiles

Clows Top lies in the south-east of Bayton parish. Bayton's chapter in the Victoria County History (1924) calls it "a modern flourishing hamlet, partly in the parish of Mamble", and records a mission room built there in 1895 in memory of a late vicar. The 17th-century cottages that the same account describes belong to Bayton village, east of its church, so a Clows Top roof is read for what it is, starting at the gable.

At the verge, the covering runs out over a gable wall. Its end tiles sit on a bed of mortar over a strip called the undercloak, or are held by a dry-fix unit, and either way that edge takes the wind side-on with no slope beyond it to shelter it. We look along the verge for tiles that have crept outward and for bedding that has dropped out in pieces. We look at the face of the gable for dark streaks under the verge, which show where rain has been tracking down the wall. From the loft we put a torch on the wall plate, the long timber laid on top of the wall under the rafter ends, because a damp patch there tells us the leak is older than the stain on the bedroom ceiling.

Fixing a verge is a choice between methods. Marley says "Installing to BS 5534 isn't required by law", and points out that, after the 2015 changes to the standard, a mortar bed on its own no longer counts as a sufficient fixing for the covering. BS 8612 deals with dry-fix systems, whose clips and screws hold the end tiles mechanically. On a Clows Top gable we weigh the two: a rebedded verge with a fixing added keeps the look of the house, and a dry unit stays put without fresh mortar. The choice goes in the survey notes with a photograph of the gable as found.

Where a roof meets a taller wall, a lead flashing closes the joint, dressed loosely enough to follow small seasonal movement. Our roof repairs page covers the smaller jobs, and a gable verge is one of the places where a repair is worth more than a replacement.

Mortar at the verge

Why does verge mortar drop out at a gable end?

Mortar dries, shrinks and cracks as the roof moves through wet and dry spells, and wind works the loose pieces free. The cure is rebedding with a mechanical fixing added, or a dry-verge unit made to BS 8612, picked to suit the house.

The verge is the edge the wind reaches first, so the survey starts there.

Fig. 2 The verge, drawn close

Callout 2 of 3

Battens, underlay and when a slope needs re-covering

The slope is most of the roof, and the survey reads it course by course. We note tiles that are cracked, slipped or flaking at the face, and we check the battens, the thin timbers that carry the tiles, wherever a slipped tile lets us see them. Underneath sits the underlay. Underlay of the HR (high-resistance) type is not vapour-permeable, which means a roof lined with it relies on air moving through the loft, so we check that the eaves are open and that insulation has not been pushed against the boarding.

One cracked tile is a small repair. A slope with tiles failing across a wide area is a different conversation, and we say which is which in the written report. Tile life is quoted loosely, so we name the sources. Marley's life expectancy for roof tiles is around 60 years, while HomeBuilding gives plain concrete tiles 40-50 years. The BRE minimum of 60 years applies to clay tiles only. Those are ranges from a manufacturer, a magazine and a research body, and the tiles on your own roof tell their own story.

Where two slopes meet at a valley, a channel of lead or tile carries the run-off down to the gutter. Leaves and moss settle in it, so we clear it, look along the lead edges for lifting and check that the tiles either side still sit tight to the channel.

A full re-cover brings in the rules. Inside the Planning Portal's England limits (less than 25 per cent of the building envelope and less than 50 per cent of the roof) a Clows Top re-cover would not normally need an application. A new covering that adds 15 per cent or more to the weight is different, because it needs Building Regulations approval and a look at the rafters first. For Clows Top that approval comes from South Worcestershire Building Control, which Malvern Hills District Council, Worcester City Council and Wychavon District Council run in partnership.

Re-covering counts as renovating a thermal element, so Part L applies as well: AD L 2021 Table 4.3 gives a roof threshold of 0.35 and an improved figure of 0.16. Our roof replacement page sets out the stages of a full re-cover.

A tiled slope, read course by course

Tile faces
Cracks, flaking and slipped courses photographed
Battens
Sound timber where a tile is lifted
Underlay
Torn or sagging sections noted
Eaves gap
Open, with insulation held back
Valleys
Lead or tile channel clear of debris
Fig. 3 The slopes, drawn close

Callout 3 of 3

Roof windows, listed neighbours and the council's lists

A roof window in an existing roof is a plan that involves the rafters behind the ceiling, so the first question is what they allow. The rules for it are in our planning guide for roof windows, which we link here instead of repeating them. On energy, AD L 2021 Table 4.2 sets roof windows at 1.4 or WER Band B, and rooflights at 2.2, so a window and a rooflight are measured against different figures. Our skylights page covers the choice of unit.

Foxley Farmhouse is the closest listed building to Clows Top: Grade II, list entry 1081402, first listed 27 February 1986. Listing is a property-by-property matter, so a house in Clows Top is affected only if it has an entry of its own. If it does, section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990 requires consent for works that would "affect its character as a building of special architectural or historic interest", and that consent applies on top of any permitted development right.

Malvern Hills District Council holds the conservation area list, and a Clows Top address should be checked against it before a window or dormer goes into a roof slope. On Article 4, the council states: "At present there are no Article 4(2) Directions in force in Malvern Hills District Council."

Where a rear extension or porch has a flat roof, it falls under BS 6229:2025, which NFRC summarises as "a minimum 1:80 finished fall for general roof areas and internal gutters". The fall is measured before any membrane goes down, because a roof laid flat holds a pool that no membrane will cure.

Any roof, old or newer, raises the matter of what lives in it. GOV.UK says "All bat species, their breeding sites and resting places are fully protected by law", and roof repair is one of the jobs it names as a risk to them. A licence for unavoidable work may come from Natural England, according to GOV.UK. If the loft shows droppings or the eaves show staining, the plan waits for advice before the first tile moves, and a bird's nest in use gets the same pause.

What shapes the price of a new window in a Clows Top roof

Rafters behind the ceiling
Whether rafters must be trimmed and strengthened
Unit chosen
Size, glazing and the energy figure it must meet
Flashing kit
Fit to the covering already on the roof
Access
Scaffold or tower, and how steep the slope is

One written total price, never itemised.

Clows Top roofs: verges, listing, scaffold and roof windows

What goes wrong at the gable verge of a Clows Top house?

Verge mortar cracks and drops out, end tiles creep outward, and rain tracks down the face of the gable and into the wall plate. The survey reads the gable from outside and from the loft, and photographs the gap. The repair is picked to suit the house: a rebedded verge with a fixing added, or a dry-verge unit that holds mechanically.

Does a listed farmhouse near Clows Top mean extra rules for my own roof?

Only if your own house is listed. The nearest entry is Foxley Farmhouse, Grade II, list entry 1081402, and listing attaches to each building separately. If your house has an entry, consent under the Planning (Listed Buildings and Conservation Areas) Act 1990 is needed for works affecting its character. If it has none, check the conservation area list with Malvern Hills District Council.

Who pays for the scaffold licence on a Clows Top lane?

For a scaffold on the highway, Worcestershire County Council licenses it at £85 per week and £65 for subsequent weeks, with a £25 urgency surcharge within 2 days, and the council leaves the application with the firm contracted to do the work. Licence and scaffold both sit inside the one written total, and the survey records where the scaffold can stand.

Can I fit a roof window into my Clows Top roof?

The first limit can be the roof structure, not the paperwork. The rafters have to take the opening, and AD L 2021 Table 4.2 sets roof windows at 1.4 or WER Band B and rooflights at 2.2. Planning is covered in our guide to roof windows in England and Wales. A listed or protected building brings consent into it as well.

What do a few replacement tiles on a Clows Top roof cost?

Which? reported £75-£400 for one to six replacement tiles in its November 2025 survey, and £80-£300 for a new ridge tile; both figures exclude VAT. They come from a consumer magazine's survey of the whole country, and none of them is a Horizon price. On your own roof the figure moves with the access and with what the survey finds under the tiles, so the one written total follows the survey.

Who carries the safety duties on a small Clows Top roofing job?

Under CDM Regulations 2015 regulation 7(1), a homeowner's client duties land on the contractor if a single firm carries out the Clows Top job, on a principal contractor once more than one firm is on site, or on the principal designer if both sides agree in writing. HSE defines a domestic client as someone having construction work done on their own home that is not part of any business. Regulation 15(5) asks a single firm for a construction phase plan.

Get a Clows Top roof looked at

Describe the roof or send a photograph of the gable, and the visit comes with a written total price afterwards.

10-year workmanship guarantee, in writing