Callout 1 of 3
Where the covering meets a sixteenth-century frame
The Victoria County History account of Deerhurst parish, published in 1968, says several small farm-houses went up at Upper Apperley in the 16th and 17th centuries, and that "The houses are timber-framed with plaster or brick filling and a few retain their thatched roofs". In Lower Apperley, it adds, cottages and small farm-houses of brick, roofed with slate or tile, followed in the 18th and 19th centuries. So a roof here may stand on a frame that has carried its covering for centuries, on later brick, or on both after years of extension. Our survey begins by finding out which kind of house is under the covering, because the repair follows from that.
At the end of a framed gable the covering stops, and the strip along that edge is the verge. Timber shifts as it dries and ages, and the gap that opens between frame and covering is a way in for rain. We look at the verge mortar, the bedding that seals that edge, and at the barge board where there is one. From the loft we look at the wall plate (the timber laid along the head of the wall, which carries the foot of each rafter) and at the rafter feet themselves. Damp that has reached an old frame can show there before it stains a bedroom ceiling.
Some gables are finished dry, with clips and cappings in place of mortar, and BS 8612 covers dry-fix systems at the ridge and the verge. On a framed house we choose between a bedded and a dry verge by looking at the building: a bedded edge can suit an old gable, and a dry edge can suit a gable that has moved too far for mortar to hold. Either way, mortar is never the only thing holding the edge on. You see photographs of the gap, the mortar and the stain, taken from the ladder and from the loft, so the repair can be judged against the picture.
Where a framed wing joins a brick one, we look hardest at the join, because two materials move at different rates. The abutment flashing, the strip of lead or similar metal that seals the roof against the wall, has to allow for that movement. If part of a property is thatched, our survey covers the tiled and slated roofs beside it and the junction between them, and the thatch itself goes to a specialist thatcher. A patched verge, an old lead repair and a later brick extension can sit within a few metres of one another, and the report labels each. Smaller Apperley jobs sit on our roof repairs page.
Checked where an Apperley frame meets the covering
- Verge mortar that has dropped out or cracked
- Gaps between the timber frame and the covering
- Wall plate and rafter feet from the loft
- The join where a framed wall meets brick
- Flashings along the abutment
A gap at the frame is where the rain gets in, so the survey starts there.















