In brief
MyJobQuote gives around £7,800 as the average for a fitted slate roof. HomeBuilding reckons a Welsh slate roof for a 65 m² three-bedroom semi might reach £18,000, where plain concrete tiles on the same house run from £10,000 to £15,000. Which? gives £7,000 to £21,000 for replacing an entire roof, excluding VAT, its house being an average three-bedroom one. These are third-party UK figures, never our prices. Our own figure comes only after the survey, written down as one total.
Three published figures for a slate roof
No single number fits every house, so the table sets three sources side by side. They measure different things and are not averaged.
| Source | Figure | What it covers |
|---|---|---|
| MyJobQuote (October 2026) | Around £7,800 | Average for fitting a slate roof |
| HomeBuilding (September 2025) | Might reach £18,000 | Welsh slate, 65 m² roof, three-bedroom semi |
| Which? (November 2025) | £7,000 to £21,000 | An entire roof on a three-bedroom house, excluding VAT |
London and the South East carry higher labour rates, HomeBuilding adds. None of the three comes from Herefordshire or the border counties, and only the first is about slate. They show the spread a written quote could fall inside, which is useful when two quotes disagree sharply. They cannot tell you what your own roof will cost, because the area, the pitch and the condition of the battens are missing from every one of them. HomeBuilding's own reference case is a semi in plain concrete tiles, so its slate figure is best read as a comparison within one house.
What moves the price of a slate roof
Two roofs with the same footprint can price very differently, because the work around the slate counts as much as the slate. A written price moves with:
- the area and pitch of the roof, and how awkward it is to reach
- the slate itself: Welsh, Spanish or reclaimed
- whether the battens and underlay are sound or must be renewed
- how many chimneys, valleys and abutments need fresh leadwork
- the ridge and verge treatment
On the slate alone, HomeBuilding's supply-only figures are £185 per m² for Welsh slate against £72 per m² for Spanish. That describes the material, never a roof total, and nobody should multiply it by an area to guess a price.
Ask every firm to name the slate it is pricing, with its source and size, so that two quotes describe the same covering. Then read each for the sentence saying whether VAT is in it. Any scaffold the job needs goes into the one total we put in writing. Stripping to bare rafters is also the moment a sagging batten gets replaced, and a quote should say if it assumes the old timber stays. Our guide on whether a Welsh slate roof is dearer goes further into the choice of slate.
How long a slate roof is expected to last
Slate costs more than a plain concrete tile on day one, so a fair comparison runs across the life of the roof. The ranges below are typical figures from the named source, never promises, and the two concrete-tile sources disagree.
| Covering | Lifespan | Source |
|---|---|---|
| Welsh slate | 100+ years | HomeBuilding |
| Spanish slate | 75 to 100 years | HomeBuilding |
| Reclaimed Welsh slate | 50 to 80 years | HomeBuilding |
| Concrete tiles | Around 60 years | Marley |
| Concrete tiles | 40 to 50 years | HomeBuilding |
SPAB, writing about Wales and the Marches, thinks it likely that well-slated roofs pass 100 years. A cheaper covering renewed sooner can cost more across the years than a dearer one that stays put, but only the lifespan ranges are sourced, so that sum is yours to run against a quote. Lifespans for a reclaimed slate depend on where it came from and how it was lifted, so ask for the source in writing before agreeing a cheaper reclaimed option. How much of that a roof actually gets depends on the nails and battens behind the slate, which is why our survey looks at them as closely as at the slate.
Rules that shape a re-slate in England and in Wales
Fitting a new slate roof counts as re-roofing, and the test turns on the address.
- England: the Planning Portal sets a Building Regulations threshold for re-roofing with no application, being less than 25 per cent of the total building envelope together with less than 50 per cent of the roof. A full re-slate sits above it.
- England: the Planning Portal also names a new covering of 15 per cent or more extra weight as a reason to seek approval, which matters whenever the new slate weighs more than the old covering.
- Wales: the Welsh Government says re-roofing needs Building Regulations approval in most situations, and it points to slate being swapped for tiles as the kind of change where approval is likely.
Re-covering also reaches the insulation. In England, AD L 2021 Table 4.3 takes a renovated roof worse than 0.35 to 0.16. Wales has Table 11.1, which also gives 0.16, with 0.35 as the worst acceptable figure when 0.16 cannot be reached.
Which of these applies is settled before any price is written. See the guide to re-slating a roof for the steps, or go back to slate roofing.
