01432 610152 Get a quote Call 01432 610152

Replacing a rooflight

What does a rooflight replacement cost?

A cost guide gives a starting figure for swapping a rooflight, and it is only a starting figure. Size, roof type and access decide where a real job lands.

In brief

Checkatrade's repair rates, last updated in June 2026, list rooflight replacement, with a Velux as the example, at "from £1,000", and say all costs are exclusive of VAT. A "from" figure marks the bottom of a range, so treat it as a floor for the simplest job and not as a typical bill. Once we have surveyed your roof, you receive one written total that says plainly what it covers, with VAT and scaffold addressed.

What the published starting figure tells you

Checkatrade's repair-cost guide carries one line for rooflight replacement, with a Velux as its example, at "from £1,000". The same guide says all its costs are exclusive of VAT and that VAT will need to be added, so a bill at the foot of the range still has that to come, and the scaffold and the waste are separate matters to settle in writing.

Read the word "from" literally. It names the lowest figure the guide gives and says nothing about the middle of the range or the top. A large unit, a slate covering, an awkward pitch or work that must be reopened from inside can all sit well above it. A guide cannot see your roof. Treat the figure the way you would treat a "prices from" ticket in a shop window: a reason to ask questions, and no more than that.

A cost guide earns its place in one respect: it shows whether a quote lies in a believable region at all. When you read our written price beside it, ask for any gap to be explained in terms of the roof itself, such as its height, its covering and the opening, rather than the market. The roof sets our price, and it arrives as a single total.

What lifts a rooflight job above its starting point

One word, rooflight, covers quite different jobs. These are the points that change what replacing one involves:

  • the size of the unit, since a large pane means heavier glazing and more hands to lift it into place
  • whether it is a window in a pitched slope or glass set in a flat roof, which are separate products with separate energy figures
  • the covering around it, because tile, slate and lead each need their own flashing kit
  • whether the new unit fits the old opening or the rafters must be trimmed to take it
  • the height of the eaves, which decides whether the job needs a scaffold or a tower, and how long it stays up
  • the lining inside the opening, where plaster and paint have to be made good once the old frame is out

The written quote includes the scaffold. A scaffold on the highway is covered by the Highways Act 1980 s169, and we arrange the licence with our scaffolder. Photographs of the old unit and its flashing, taken when we survey, go with the quote, which shows you exactly what comes out.

The rules that shape what you buy

The glazing has to meet Approved Document L. England's Table 4.2 puts rooflights at 2.2 and, for the roof window, at 1.4 or WER Band B. Welsh Table 4.1 repeats both figures. Picking the wrong category is an easy way to buy a unit that building control will not accept, so a good quote names the category and keeps the data sheet with the paperwork.

Planning rules part ways at the border. In England, Class C covers other alterations to a roof and has no article 2(3) exclusion, so a conservation area does not take the right away. Across the border, a conservation area or National Park rules a roof light out of permitted development. For a new opening, the Welsh Government says "Approval under the Building Regulations will generally be needed for the installation of a new rooflight".

A like-for-like swap raises different questions from a new opening. Ask the council's building control service or a registered building control approver which one applies to you, and read the roof window planning guide for the conditions behind each class.

What a sound rooflight quote states

Rather than comparing sums, compare what each quote says it covers, and ask the writer of any quote to clarify a vague word before you sign. If a quote only says "supply and fit", the unit and the flashing are not pinned down. A sound quote for this work states:

  • the make, model and size of the unit, with its U-value or window energy rating
  • the type of flashing for your covering
  • whether the old unit and the waste are taken away when the work is done
  • a plain yes or no on VAT, and on the scaffold
  • the date the price holds until
  • the work to the inside of the opening, down to the paint

Guides differ in what they state about VAT. MyJobQuote's pages give none for their figures, so do not set two guides next to each other as if the sums were measured alike. Our page on what replacing a Velux costs gives the MyJobQuote swap figure, and the small Velux price deals with the product alone. More choices sit under Velux and skylights.

Related questions

Does the rooflight starting figure include VAT?

No. Checkatrade's "from £1,000" is exclusive of VAT, and the guide adds that VAT has to be added on top, as for every figure on that page. Ask us to state on the written quote whether VAT is included, so the figure you compare with it is on the same basis.

Can a rooflight be replaced without planning permission?

The answer turns on the country and the land. In England, Class C covers roof alterations, including in a conservation area. Welsh Class C bars inserting a roof light on protected land such as a conservation area or National Park, so confirm a swap there first. Ask the council, or the National Park Authority inside the Park, before you order the unit.

Get your free roof quote

Tell us about the roof and we will arrange a survey.

10-year workmanship guarantee, in writing