In brief
No. Velux is a brand of roof window, and skylight is the general word for a window set in a roof. People say Velux for any roof window, the way they say hoover for a vacuum cleaner. The Approved Documents use their own terms, roof window and rooflight, with different energy figures, and the planning orders speak of roof lights. Which term applies depends on the product and the roof.
A brand name and a general word
Velux is the name of a maker of roof windows. Skylight is a plain-English word with no legal meaning, and it covers a window in a pitched roof, a glazed unit on a flat roof, a lantern and even a tube that carries daylight down into a room.
When someone asks for a Velux, they mean a roof window set into a slope. Other makers produce similar windows, and the right one is the one that suits the roof and the room. We start from the opening and the covering, and choose the product after that, so the name on the frame is never the first question.
Habit explains the muddle. A brand name that comes to stand for the whole product is common in English, and roof windows are no different. The trouble starts only when the word is used on a quote or a planning form, because those documents are read against rules that name the product type, not the brand.
Our page for Velux and skylights uses both words, since both are how people search.
The terms the rules use
In the energy rules, the type of product decides the figure it has to meet. England's Approved Document L (2021) and the Welsh Approved Document L treat them separately:
| Product | England (Table 4.2) | Wales (Table 4.1) |
|---|---|---|
| Window, roof window | 1.4 or WER Band B | 1.4 or WER Band B |
| Rooflight | 2.2 | 2.2 |
The figures are U-values, in W/(m²·K), where a lower number loses less heat. WER is the Window Energy Rating, and Band B is the rating asked for as the alternative. The Building Regulations 2010 also treat the roof as a thermal element, and they leave windows, roof windows and roof-lights outside that definition. A window is therefore judged on a figure of its own, and not as part of the roof around it.
Which of the two a particular product counts as is stated by its maker's data, and we check that before ordering. A fixed unit and an opening one can fall under different headings, and so can a unit set on a kerb and one set in a slope, so the label on the box is not a safe guide. The data sheet and building control settle it, and the answer goes into your paperwork before the window is ordered.
What the difference means for planning
The planning orders do not name a brand either. They refer to roof lights in Wales and to alterations to the roof in England:
- In England, Class C of the 2015 order is headed with "any other alteration to the roof of a dwellinghouse", and it covers a roof window on a house within its conditions.
- In Wales, Class C.1(d) of the 1995 order leaves roof lights out on article 1(5) land, which means conservation areas, National Parks and National Landscapes.
So the question that matters is not whether the window is a Velux, but where it goes and how far it stands out. A window on the back slope of an ordinary house is a different case from one on a side slope, one in a conservation area, or one on a listed building. A listed house needs consent whichever make is chosen, and the same goes for any other brand.
The wording of each condition is quoted in our planning guide for England and Wales. For the difference between a rooflight and a roof window in practice, see rooflight or roof window.
Choosing one and what it costs
When we come out, the slope gets photographed, the opening measured and the covering identified, because the flashing kit must suit slate, plain tile or stone. We look at the room too, since the sash and the lining affect how the window opens and how much light it brings in.
Checkatrade lists rooflight replacement from £1,000, ex VAT, and that is a starting figure from a cost guide, not a price for your roof. Yours arrives as a written total after the survey.
Whatever the make, a quote should name:
- the make, model and size of the window
- the type of glazing and the energy figure it meets
- the flashing kit, matched to your covering
- the lining and finish inside the room
If a different make meets the same figures and fits the same opening, we tell you, and you choose. The decision stays yours, and the written total changes only if the product does. A swap of make is easiest before the order goes in. For the next step, see Velux replacement cost.
