In brief
Normally no planning permission, if the new covering matches. Welsh Government guidance treats a re-roof of a house as something that may not need a planning application, so long as the new materials look like the old. A conservation area is article 1(5) land, which takes roof lights and dormers out of permitted development. Building Regulations approval is a separate step, and for most re-roofing it is required.
What the Welsh planning rules say about re-roofing
Wales still uses the General Permitted Development Order 1995 for houses. Class C deals with roof alterations as a whole. In the Welsh Government's plain summary, re-roofing a house is not normally a matter for a planning application, and the same is said of inserting roof lights or skylights. The second half of that has limits, which the next section covers, and a conservation area is one of them. Check the position for your own address before you order materials or book a date.
The condition that matters for a re-cover is C.2(a): the appearance of the materials in any exterior work must so far as practicable match the appearance of the materials in the equivalent element of the existing dwellinghouse. The wording turns on how the covering looks, so colour, texture, size and coursing all count. A like-for-like re-slate or re-tile sits inside it. A switch to a covering of a different appearance is not covered, so the council is asked before work starts, or the National Park Authority inside Bannau Brycheiniog.
For slate to tiles specifically, our page on swapping slate for tiles in Wales goes further.
Roof lights, chimneys and dormers on article 1(5) land
Article 1(5) land in Wales means land within a National Park, an area of outstanding natural beauty (a National Landscape) and an area designated as a conservation area. Roof work changes there, and the chimney row catches owners who plan to take a stack down while the roof is open:
| Work | Class | Permitted development? |
|---|---|---|
| Re-covering to match | C | Normally yes |
| Inserting a roof light | C.1(d) | No |
| Removing a chimney | C.1(c)(vii) | No |
| Dormer | B.1(g) | No |
Technical guidance from the Welsh Government states that roof lights are not permitted for houses on article 1(5) land. A roof light added in a Welsh conservation area therefore needs planning permission, and our page on roof lights in Welsh conservation areas and parks sets that out.
Planning sits beside Building Regulations, and the two are separate. For a new rooflight, the Welsh Government says approval under the Building Regulations will generally be needed on top of any planning permission, so a roof light in a conservation area passes two tests, one under planning and one under the building rules.
Article 4, listed buildings and Building Regulations
The Welsh Government adds that an Article 4 direction may already have taken permitted development rights away, and that conservation areas are where such directions are met most often. Ask the planning service whether one covers your street, because only the council can answer for its own area.
Conservation areas are designated under Part 4 of the Historic Environment (Wales) Act 2023. A listed house is a separate matter: since 4 November 2024, works that would affect a listed building's special architectural or historic interest have to be authorised, through listed building consent under section 89, and the house keeps its Class C rights while needing that consent as well.
On Building Regulations, Welsh Government guidance looks for Building Regulations approval on most re-roofing. On the Welsh Government's roof page, work on less than 25 per cent of the area of a pitch or flat roof does not normally call for a building regulations application. Building control sits with the council or with a registered building control approver.
In Monmouthshire, 01633 644831 is the line of the Duty Planning Officer, for questions about whether planning permission is needed, so a call there settles the planning side before any quote is signed.
How we approach a roof in a Welsh conservation area
The survey opens up on the high points of the roof, with the ridge, verges and chimney, because that is where a conservation-area roof shows both its age and its character. Pictures of what turns up on your own roof come with notes on what covers it, how it is fixed and the state of the lead, so you see the evidence behind every recommendation.
Matching is the test throughout, so the covering we suggest is checked for size, thickness and colour against what is already up there, and sample matches are held against the existing slates or tiles where the council wants to see them. If the roof is sound enough to repair, a repair is what we propose, and a repair may need no approval at all. Replacing the whole roof is a different case, with approval to match.
After the visit you receive one total in writing. For a Powys address, building control means the council's service or a registered building control approver, and planning questions go to the council or, inside the Park, to the National Park Authority. See re-roofing a house in Wales for the wider picture, and roof replacement for how a job runs.
