01432 610152 Get a quote Call 01432 610152

Roof timbers

Rafters, purlins and trusses: the timber under a pitched roof

Rafters, purlins and trusses carry the full weight of a pitched roof. This guide explains each timber, how the load travels and what to ask before anything is changed.

Horizon Roofing Hereford 9 min read

A tiled roof looks light from the road, but its covering is heavy and the timbers beneath it do the carrying. Those timbers are hidden by the tiles above and the ceiling below, so owners meet their names for the first time when a builder says a purlin is sagging or a truss is in the way of a loft conversion. A little vocabulary goes a long way at that point.

There are two broad ways to frame a pitched roof. In a cut roof the carpenter shapes and fits each timber on site, so every roof is a little different. In a trussed roof, triangles of timber are made in a factory, lifted into place and braced together, and every truss in the run is the same. A single house can have both, because an extension can be framed differently from the original.

The sections below cover the main timbers, each system, the signs of strain, and the rules on weight and structure in England and Wales. For the covering above the timbers, see our pitched roofing page.

The timbers, named from the wall up

Names vary from one region and one carpenter to another, but the jobs are the same. The table lists the members you are most likely to hear about, working upwards from the top of the wall.

The main timbers under a pitched roof
TimberWhere it sitsWhat it does
Wall plateAlong the top of each side wallTakes the foot of the rafters and spreads their load
RafterUp the slope, wall plate to ridgeCarries the battens, the covering and the snow
Ridge boardAt the apex, between the raftersGives the rafter tops something to fix to
PurlinAcross the slope, under the raftersHolds the rafters up mid-span
Collar or tieAcross the loft, joining a pair of raftersStops the roof pushing the walls apart
TrussAcross the house, at set intervalsDoes the work of rafters and ties in one frame

A batten is not part of this list. It is the thin timber strip nailed across the rafters, and the tiles hang from it. If a roofer says "battens", they mean that layer; if they say "rafters", they mean the structural frame beneath it.

The wall plate is easy to forget, yet it is where the weight passes into the walls, and a plate that has rotted at the end is one of the faults a survey looks for first. Ask for the plate to be checked wherever tiles are lifted at the eaves, because that is the one time it can be seen without opening a ceiling.

Cut roofs: rafters, purlins and struts

In a cut roof the rafters are pairs of timbers meeting at the ridge. Over a short span they can carry the roof alone. Over a longer one a purlin runs across the slope beneath them, resting on the gable walls at each end, and the rafters rest on it. A purlin on a wide house is itself held up by struts, angled timbers that run down to a wall below, and the walls under those struts are bearing walls, with a part to play in the structure.

This is why the question "can we take that wall out?" cannot be answered from the ground floor alone. A wall that looks like a partition may be carrying a strut from the roof, so any change to it has to be checked by someone qualified to calculate the load. A structural engineer does that, and building control looks at the result.

A cut roof gives a room-sized space in the loft, with no trusses to work around, which is why loft conversions are possible in some older homes. The same open space is a reminder of what the frame is doing:

  • each rafter in the run takes part of the load
  • the purlin shortens the span the rafters have to cover
  • the struts pass the load into walls that can bear it
  • the collars and ties stop the slopes spreading

Removing or notching any one of these without a calculation changes how the whole frame works.

Trussed roofs and why they are left alone

A trussed roof is built from frames, each one a set of triangles. The shape is the strength: a triangle does not change shape when loaded, so the members work in tension and compression along their length, and the frames are joined with metal plates at the nodes. The frames sit at regular intervals along the house and are tied together with bracing.

Because each member has a defined job in the frame, cutting a truss to make headroom is a structural alteration. A truss member that has been cut, notched or drilled has lost the strength the designer allowed for it. We do not cut trusses on the strength of a site decision, and a conversion that wants a clear loft space needs the frames redesigned by an engineer, which can mean new steel or a new beam to replace the work they were doing.

For a roof repair, the points to know are these:

  • do not store heavy items on the lower chords of a truss, as they were not designed as floor joists
  • do not let anyone saw through a web member to fit a tank or a ladder
  • report any plate that has pulled away from the timber, or timber that has split at a joint

Replacing the covering on a trussed roof is a standard job, as the frames are not touched. But a roof that is being changed from tile to a heavier covering needs the weight checked before the order is placed, and the section on weight below explains the tests.

Timber-framed houses and old carpentry

Around the villages of north-west Herefordshire, the frame of the house is on show in the walls. The county's stone atlas singles out timber framing, the black-and-white look, as the regional style that stands out, and records a plinth of sandstone or siltstone under the lowest horizontal beam of such a frame. That plinth is the point where the frame meets the ground, and the roof sits at the opposite end of the same structure. Its large external stacks are, in its words, "commonly of local sandstone".

For a roofer, that history matters in two ways. First, roof timbers on such houses are old, hand-worked and irregular, so a replacement beam is sized and shaped to suit the building and not copied from a catalogue. Second, the roof, the wall frame and the stack are tied together, so a repair at the verge or chimney is planned with the carpentry in view.

A listed house adds a further layer. Work that touches a listed house's character needs consent: under section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990 in England, and under sections 88 and 89 of the Historic Environment (Wales) Act 2023 in Wales. Replacing a timber in a listed roof, even like for like, is a question for the council first.

Where a frame is old, we photograph its joints and timbers so the condition is recorded before a decision on repair or replacement is made, and the pictures stay with your quote. Stone-tiled roofs on such houses are a further case, and the stone atlas names the St Maughans sandstones as the principal source of Herefordshire roofing stone.

Signs that the roof frame is under strain

You do not need to climb into the loft to spot the main signs. Stand across the road and look at the roof line. A straight roof reads as a clean line; a strained one shows kinks.

  • a ridge line that sags between its ends, or a slope that bellies in or out
  • tiles that have opened gaps along a line, or a row of slipped tiles over one spot
  • cracks in the gable wall near the top, or walls that lean outwards
  • doors upstairs that now stick, or ceilings with a fine diagonal crack
  • in the loft, a rafter or purlin with a split, or a joint that has pulled apart

None of these proves a structural fault. A sag can come from a tired batten line or a slipped course that is simple to correct, and only a close look separates them. Our guide to why a roof line sags takes the causes one by one.

If you do go into the loft, put your weight on joists or boards laid across them, never on the plasterboard. Keep a torch with you, take photographs of anything that looks wrong, and note where it sits against the chimney or the gable so we can find it again from outside. Do not move or cut a timber to make space, and do not fix new weight to a rafter. If a sagging slope shows water coming in, mark the position and tell us at once.

Weight, structure and the rules in both countries

A heavier covering puts more load on the frame, which is why the rules look at weight.

  • In England, the Planning Portal says Building Regulations approval is needed when a new covering increases the roof's weight by "15 per cent or more". Approved Document A puts a significant change in roof loading at "more than 15%".
  • In Wales, the Welsh Government says slate replaced by tiles is a case where approval is "likely" to be needed for structural stability, and Welsh Approved Document A repeats "more than 15%".
  • In England, the Planning Portal says Building Regulations approval "will always apply when removing chimney breasts", because a breast carries part of the house.

MyJobQuote gives a range of £1,200 to £3,500 for taking out a chimney breast, with around £2,500 as its average. The roof timbers above a breast are one reason a survey comes before a price.

Section 2(2)(g) of the Party Wall etc. Act 1996 lists cutting away a projecting chimney breast among the building owner's rights, exercised by notice to the neighbour. For work to a party wall that notice runs to at least two months. Surveyors come in if the neighbour dissents, and silence for 14 days counts as dissent.

A roof void can hold a bat roost. Regulation 43 of the Habitats Regulations 2017 makes it an offence to damage a bat roost, and intent is not part of that offence. Licences come from Natural England in England and Natural Resources Wales in Wales.

Roof timbers: three questions

How does a rafter differ from a truss?

A rafter is a single timber running up the slope, normally cut and fitted on site. A truss is a ready-made triangular frame that does the work of several timbers together. A cut roof has rafters and purlins, and a trussed roof has a line of identical frames.

Can a purlin or truss be cut for a loft conversion?

Not on a site decision. A cut member has lost strength the designer allowed for, so the load has to be passed on through steel or a new beam, calculated by a structural engineer. We photograph the frame first so the engineer starts with the facts and not a guess.

Does a heavier tile mean a new roof frame?

Not always, but the weight has to be checked first. In England the Planning Portal sets the line at 15 per cent or more, and in Wales approval is likely when the material changes, so we check the figures with building control before the order is placed.

Get your free roof quote

Tell us about the roof and we will arrange a survey.

10-year workmanship guarantee, in writing