Callout 1 of 3
Stone, slate and tile on Leintwardine slopes
Three coverings are on record for this parish. The Royal Commission's 1934 Herefordshire volume lists Leintwardine's monuments 4 to 51 and, unless a note says otherwise, calls them seventeenth-century buildings of two storeys, built of timber frame, with stone, slate or tile on the roof. That describes those buildings in 1934. It names three coverings without saying how many roofs carry each, so your own house gets its own answer: we climb up, find out which covering is there and see how it is laid, and then tell you.
Stone roofs, where they survive, are laid in thin sandstone tiles called tilestones. For stone roofing, the Herefordshire Building Stone Atlas looks first to the St Maughans sandstones, and SPAB's note on Welsh slate and stone roofs calls them "predominantly double-lapped", meaning every course sits under the overlap of the one above it, so that the joints are covered twice.
A slate roof in good order lasts a very long time. HomeBuilding gives Welsh slate "100+ years", and SPAB writes that a well-slated roof is "likely to be more than 100 years". Neither figure is a promise, and a slipped slate is a repair and not a verdict on the whole roof. BRE's 60-year minimum is a figure for clay tile alone. For concrete tile, Marley says around 60 years and HomeBuilding says 40 to 50 years.
Whatever the covering, the survey sorts the roof into three piles: units to refix, units to replace and slopes to leave alone. Replacements match the size, colour and lap of the old. A slope is stripped only when the battens and underlay beneath it have failed, and when one does come off, the covering is stacked in order so the sound units can go back. Slate is held by a nail through a hole near its head, and once that nail corrodes the slate slides, which is why a run of slipped slates points to a fixing problem and not to damage. You receive a photograph of each failed unit where it sits and then a single written total. Our slate roofing page explains natural slate and how we fix it.
Checked on a Leintwardine slope
- Slipped or cracked units, shown where they sit
- Nail or peg fixings that no longer hold
- Laps and gaps between courses
- Battens and underlay seen from the loft
- Ridge, verge and valley edges
A slipped unit is a repair, and a slope is stripped only when what lies beneath has failed.















