Cleaning old clay tiles is a different task from cleaning a recent concrete roof, even when the green growth looks identical from the road. A clay tile is fired from earth, and on an old roof its face has been through many winters. The surface may be soft, the edges may be rounded, and the nibs, the small lugs on the back that hook over the batten, may be the only thing holding a tile in place. A method that suits a hard modern tile can strip the face from an old one in an afternoon.
For that reason we survey the tiles before we discuss cleaning. We look at which tiles are sound, which are loose or cracked, and what sits beneath them. Then we match the method to the roof, and we tell you plainly if the better spend is a repair, or if the roof should be left alone.
Herefordshire has its own history with clay: the Herefordshire building stone atlas notes that the Raglan mudstones fed "the famous Herefordshire brick, tile and pipeworks industries". This guide sits within our roof cleaning and moss removal service, and it takes the steps in the order a survey does.
What makes an old clay roof delicate
Clay plain tiles are small, thin and laid in overlapping courses, each hung from a batten by two nibs and, on some roofs, pinned with a peg or nail. On a roof of some age the tiles have weathered unevenly, and the south slope may look quite different from the north. Pantiles, the curved S-shaped tiles, behave in much the same way, although they are laid with a different overlap.
Three features make an old clay roof easy to damage while cleaning:
- a worn or flaking face, which gives way to a scraper or a hard bristle
- nibs that have weakened, so a tile lifts when pushed or rubbed
- mortar bedding at the ridge and hips that has broken down, and crumbles under a boot or a brush
Moss sits in the gaps between courses and in the hollows of the tile face, so removing it means working close to the very parts that are weakest. A roof that looks stable from a ladder can have a dozen tiles loosened by a careless sweep.
Clay tiles differ from house to house. We do not assume what a particular roof carries. We read it tile by tile, and we photograph anything unusual before it is touched: a repaired patch in a different colour, a run of newer tiles beside old ones, a ridge that has been re-bedded in a hard cement mortar. Those details change which method is safe and where we start, and they are the first things you see in the survey photographs.
What lichen, algae and moss do to clay
Moss is a plant that holds a mat of fine growth against the tile and keeps the surface damp for longer after rain. Algae is the dark film that streaks down shaded slopes. Lichen is the flat crust, grey, yellow or orange, that grips the face of the tile and can be hard to lift without taking some of the surface with it.
Clay is porous, so a roof already past its best has less to spare when damp growth settles on it. A mat of moss left for years can load the courses, block the gaps between tiles, and send water sideways. Our guide to whether moss damages roof tiles sets out what the growth does and does not do.
Lichen is the hardest of the three to treat on a clay face, because it bonds to the surface. Leaving it in place is a sound choice when it is slow-growing and is not causing a fault.
The test we apply is whether the growth is causing a fault or only a colour. Moss that has built up in a valley, or banked against a chimney, is a fault, because it holds water where the roof is built to shed it. A pale crust in the middle of a slope is a colour. Treat the fault, and be wary of putting a tool to the colour.
What follows from that test
Where the growth is only a colour, a biocide treatment left to work can be all the roof needs, and it leaves the tile face untouched. Where the growth is a fault, hand removal in the affected area comes first, followed by the treatment, and then a light brush once everything has dried.
Methods compared for a worn clay face
The table sets out the usual methods against the risk each carries for an old tile. Marley's guidance warns against high-powered jets because of the wear to a tile's face, so a jet wash is not part of the plan for any tile.
| Method | Risk to a worn face | Where it fits |
|---|---|---|
| Hand removal with a soft tool | Low if the tiles are sound | Thick moss mats |
| Biocide treatment, left to work | Low on the tile, slower result | Algae and lichen |
| Soft washing at low pressure | Moderate; depends on the tile | Light algae on sound tiles |
| Wire brush or hard scraper | High; strips the face | Not for old clay |
| High-powered jet wash | High, per Marley | Not recommended |
Our guide to what soft washing means goes further into the method in the middle of that table, which is a term that can be used loosely.
On clay, the order is the same each time. Take off the thick moss by hand, treat what remains with a biocide, and let the treatment work over the following weeks. The roof will look patchy for a while, and the dead growth falls away or is brushed lightly when it has dried. Water is kept to a minimum throughout, because a porous old tile that is soaked takes longer to dry and is softer while it does. Work is planned for a dry spell, so that the roof has time to settle before the next rain.
Survey the tiles before anyone cleans them
A cleaning method has to suit the roof under it. Before we put a tool on old clay we check what is there, and where the roof allows, we do it from a ladder or the ground with binoculars first.
What the survey looks for:
- cracked tiles, and tiles with a missing or snapped nib
- slipped courses, where a tile has moved down and exposed the one beneath
- ridge and hip mortar that is cracked, loose or missing
- moss packed along valleys, against chimney stacks or under overhanging branches
- gutters holding moss that has already fallen from the roof
Any broken or loose tile is repaired before the clean, not after it. A cleaned roof that is then walked on to fix the tiles has been stepped on twice, and old clay does not forgive that. Checkatrade (June 2026, ex VAT) gives clay tile repairs at "£110 to £160" per m², on a rate that runs up to a maximum of 3 m². Which? (November 2025 survey, ex VAT) puts a repair of a handful of tiles, from one to six, at £75 to £400. Those are other publishers' typical ranges, and they cover repair rather than cleaning.
After the survey you receive photographs of the faults found on your own roof, a clear division between repairs and cleaning, and a single written total. Nothing is started until you have seen all three. If the tiles are too far gone for either, the report says that plainly and explains what a re-lay or a re-roof would involve.
Listed houses, conservation areas and protected species
An old clay roof can belong to a house with legal protection, and the two nations handle that differently. Before any job that might alter the roof covering of a listed house, ask the council. In England, listed building control comes from section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990. In Wales, the Historic Environment (Wales) Act 2023 applies, with sections 88 and 89 covering works and listed building consent. Whether a clean alone needs consent is for the council to say, so ask first. A short email describing the method and attaching a photograph of the roof is a sensible way to get a clear answer, and the reply is worth keeping.
Conservation areas add another reason to check with the local planning authority, especially if cleaning leads to replacement tiles of a different kind. You are better off hearing that from the council before the scaffold goes up than after.
Birds and bats can use the gaps under clay tiles. Both are covered by wildlife law in England and in Wales, so droppings, staining or a bird slipping into a gap are worth mentioning at the survey. Bat licences are a matter for Natural England on the English side and Natural Resources Wales on the Welsh side.
If anything is disturbed on the day, work stops and we ask before going on. A nest in the eaves, or a gap with droppings beneath it, changes the plan for that section of roof, and the photographs record what was found and where.
Clean, repair or re-lay: how to decide
Age matters when you decide. Marley notes that the BRE set 60 years as the minimum expected life of clay roof tiles specifically; the figure does not extend to other tile types. Age is one input among several, because the nibs, the battens beneath and the ridge detail matter as much as the calendar. HomeBuilding's lifespan table gives clay tiles at 60 to 80 years, approximately. Neither is a promise, and a roof inside or beyond those ranges can be sound or failing depending on its detail, so the survey judges the roof in front of us and not the date.
The decision can fall into one of three:
- The tiles are sound and the growth is a cosmetic or minor matter. Clean by hand and treat, or leave.
- A scatter of tiles are broken or loose. Repair first, then clean once the surface is stable.
- The faces are failing across a whole slope. Cleaning will not help, and re-laying the sound tiles on new battens, or re-covering, is the real question.
On cost, Checkatrade (April 2026) puts roof cleaning at £8.50 to £14 per m², and its figure for hand removal plus a biocide is around £11.50 per m². Its list also includes pressure washing, which Marley does not recommend on tile. No per-m² rate is turned into a total here. The written price comes from the survey, and a line on the quote should settle whether VAT and scaffold are in the figure.
If you are comparing coverings, our guide to cleaning a slate roof shows how a different covering changes the same decision.
