Roof cleaners use the phrase soft washing in different ways, so a quote that says only "soft wash" tells you very little. The common meaning is simple. A treatment is applied to the covering with water at low pressure, and the treatment, rather than force, does the work of dealing with the moss, lichen and algae. The opposite approach is the high powered jet, which Marley describes as "not recommended" for slate and tile.
This guide takes the term apart. It explains what happens on the day and in what order, why the product matters more than the pump, which coverings suit the method and which need other handling, how nests and bats come into it under English and Welsh law, and what the published cost guides can and cannot tell you.
If you are weighing up the options for your own house, the overview is on our roof cleaning and moss removal page. The guide to pressure washing a roof and its risks covers the method Marley does not recommend, which soft washing can be set against.
What the phrase describes and what it leaves open
The phrase describes a way of delivering a treatment, not a product or a result. Two firms can both say soft wash and mean different things: one may apply a measured treatment at low pressure and leave it to act, while another may simply turn a jet down. Neither the phrase nor the machine tells you which you are getting, and the roof pays for the difference.
Marley does not recommend high powered jet washes, because of what they can do to the face of a slate or tile. Soft washing is the usual way of avoiding that concern, but a quote has to show that it does so on your roof, in terms you can check. These are the points that turn the phrase into a plan:
- the pressure the water leaves the hose at, described in plain terms
- the name of the treatment and where the data sheet can be seen
- what is done by hand before any liquid goes on
- how long the treatment is left, and who comes back if it has not done its work
- what is done about the gutters and valleys at the end
When all five are written down, the phrase has a meaning. When none is, it is only a label, and you are being asked to trust it without the means to check. Our quote names the method for the roof being surveyed and gives one written total price, so that two quotes can be set against each other on the same terms.
The steps of a soft wash, in order
The sequence matters, because the early steps protect the roof and the garden, and the late ones deal with what the treatment leaves behind. A well-run soft wash goes like this:
- The survey. We look at the covering, photograph slipped, cracked or lifted pieces, and note where the moss is thickest and where the roof meets walls, chimneys and valleys.
- Repairs first. Loose pieces are dealt with, or agreed for later, before water goes near them.
- Protection. Plants are wetted and covered, doors and windows are shut, and cars and furniture are moved clear.
- Hand removal. Thick moss is lifted off with brushes and scrapers and collected, so it does not wash into the gutters.
- Application. The treatment goes on at low pressure from a safe access position, working evenly across each slope.
- Time. The product is left to act for the period its data sheet gives, and the roof is not walked on in the meantime.
- Finish. Gutters, downpipes and valleys are cleared, and photographs are taken from the same positions as at the survey.
Step six is the one a quick job skips. A treatment that is rinsed away at once is being given no time to act, whatever the label on the quote says. Asking how long the product is left is the simplest test of whether a firm is soft washing or just rinsing, and the answer should match the data sheet.
Why the product matters more than the pump
The machine only moves the liquid. The result depends on what is in it. A biocide is a treatment formulated to kill moss, lichen and algae, and our guide to biocide roof treatments sets out how one is chosen. For this page the point is narrower: the product, its strength and its contact time belong in the quote, and you are entitled to read the data sheet. Asking to see it is an ordinary request, and the answer tells you how carefully the job has been thought through.
What the data sheet answers, in plain terms:
- what the product is meant to treat, and on which coverings it is used
- how it should be mixed and applied
- how long it needs to act before anything is rinsed or brushed
- what it can do to plants, water, pets and paintwork nearby
- how any surplus is to be handled
The runoff deserves a thought of its own, because the roof is only the start of its journey. A treated roof sheds water into the gutters and from there to downpipes, drains and beds. Protecting plants, keeping the liquid off ponds and watercourses, and sending surplus to the right place are part of the plan, and the quote should say how. If the house stands near the Wye, the Lugg, the Arrow, the Monnow, the Teme or any smaller stream, say so when you book, so that the plan can account for it.
An honest firm will welcome those questions, because the answers are what separate a treatment from a rinse.
Which coverings suit it, and which need other handling
Low pressure is a gentler approach, but the covering still decides what is sensible. A short survey sorts roofs into those that suit a treatment and those that need a different route:
| Covering | First question |
|---|---|
| Concrete tile | Is the surface sound and the pointing at the ridge intact? |
| Clay tile | How worn is the face, and are any pieces laminating? |
| Natural slate | Are slates loose, and is any held by a clip that has opened? |
| Sandstone tilestones | Is the stone sound enough to be treated at all? |
| Asbestos cement sheet | Does it need to be left alone and handled by the rules? |
Herefordshire's old stone roofs are covered in local sandstone tilestones, with the St Maughans sandstones named as the main source in the county's building stone atlas. SPAB, which advises on old buildings, says a claim that replacement stone cannot be had deserves a call to the quarries, so a stone roof is treated gently and repaired with care.
Concrete and clay tiles raise a different set of questions. On a concrete tile, the ridge and verge pointing is looked at before any liquid goes on. On a clay tile, the worn face is the concern, and that is a matter for the survey.
Asbestos cement is the exception. HSE treats every roof of it as fragile, and our guide to moss on an asbestos cement roof explains why it is handled by the HSE rules. A listed house calls for a word with the council's conservation team before any method is agreed.
Nests, bats and a treatment on the roof
A treatment applied across a roof reaches the eaves, ridge and verge, and those are the places birds and bats use. The offences are the same in England and Wales, and the licensing bodies differ:
- England: the Wildlife and Countryside Act 1981, section 1, is breached by intentionally damaging a nest during its use or construction. Natural England issues bat licences.
- Wales: the same section of the same Act applies there. Natural Resources Wales issues bat licences.
- England and Wales: regulation 43 of the Habitats Regulations 2017 goes further for bats, since a roost is protected even against unintended harm.
No date range for nesting can be relied on, so the look for nests and roosts happens at the survey and is repeated just before application, from the same access position, with photographs kept on file. If a nest is in use at an eave or verge, that stretch waits. If bats are known or suspected, the cleaning stops while you ask Natural England (England) or Natural Resources Wales (Wales) what is needed.
The reason to raise this in a page about cleaning is that a treatment, unlike a brush, is hard to confine to one spot. It runs, it drips and it soaks into joints, so the survey for wildlife has to come first and cannot be an afterthought during the job. A ladder moved a little along the wall, or an eave left until the birds have finished, costs far less than a licence process.
What soft washing costs, and what the published rates mean
Published cleaning prices are rates per square metre, and they cover several methods. For roof cleaning, Checkatrade's April 2026 guide gives £8.50 to £14 per m² across the UK, while the hand removal and biocide treatment option comes out at around £11.50 per m². Its list of methods also includes pressure washing, which Marley does not recommend on these coverings, so a rate in that range does not tell you which method sits behind it. A rate per m² says nothing about a total until the roof has been measured.
What actually sets the price on your roof:
- the area, the pitch and the number of roof faces
- the access method, which may be a ladder, a tower, a lift or a scaffold
- how thick the growth is and what covering it sits on
- how much hand removal is needed before any treatment
- the gutters, valleys and any repairs agreed before the clean
Our quote follows the survey and is one written total price that names the method. Signing at home after the survey carries a 14-day right to cancel under the Consumer Contracts Regulations 2013, and an earlier start needs your written request. For a dispute about a contract, Citizens Advice's consumer helpline is 0808 223 1133, with a Welsh-speaking adviser on 0808 223 1144.
Cleaning suits a covering that is sound. If the survey shows a roof that is failing, the quote says that and the photographs back it up before anything is done.
