01432 610152 Get a quote Call 01432 610152

Gutter profiles

Half-Round or square gutters?

The two profiles suit different houses. Half-round follows older lines and square follows newer ones, and the fittings for each do not interchange.

Short answer

Match the house. Half-round channel has the rounded section that older and traditional buildings carry, while square channel has a flat back and straight sides that suit plainer, more modern frontages. Parts do not swap between the two. For a listed house, a new profile raises a consent question, so the council is asked first.

How the two shapes differ on the wall

A half-round gutter has a curved section like a split pipe, held away from the fascia on brackets. Its outline suits a farmhouse, a terrace or a village cottage, where the eaves are low and the walls are old. A square gutter has a flat bottom and upright sides, and it sits closer to the boards, so its lines run straight along the eaves. On a rendered or brick house from a later decade, that straight edge can sit more easily with the windows and the fascia.

Neither shape is better in itself. Each is a design choice that has to work with the fascia behind it, the downpipes it feeds and the age of the house. We look at those three points before any profile is put to you, with close photographs of the existing run for you to hold against the proposal.

Half-round and square compared
PointHalf-roundSquare
SectionCurved, like a split pipeFlat base, upright sides
Look on the wallTraditional, softer lineCrisp, modern line
BracketsHold the curve clear of the boardHold the box shape close
FittingsOwn corners, unions and outletsOwn corners, unions and outlets

Why parts cannot be mixed

A union, corner or stop end is moulded to one profile. A half-round corner will not close a square run, so a house cannot take part of its gutter in one shape and part in the other without ugly joins and weak points. That matters when a single length fails: the replacement has to be the same profile, and sometimes the same make, as the run beside it.

When we survey a run, we photograph the existing profile and note the make where it can be read. If an old pattern can no longer be bought, there are two honest routes: change the whole elevation to a current profile, or hunt for a matching length. Both are written into the quote so you can choose.

The fall matters on either shape. Brett Martin, the manufacturer, gives it as "1mm for every 600mm", so a 6 metre run needs 10 mm of drop towards the outlet. A square profile does not forgive a poor fall any more than a half-round does, and standing water shows up quickly in either.

The page on gutter falls and alignment shows how that is set, and the answer on cast iron or uPVC gutters deals with the material.

Listed houses and the rules of each nation

On a listed building the shape of a gutter can be part of its character, and the law is different in each nation:

  • England: section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990 makes works that touch a listed building's character subject to consent.
  • Wales: sections 88 and 89 of the Historic Environment (Wales) Act 2023, in force from 4 November 2024, provide for listed building consent.

A like-for-like repair is not the same as a new profile. The council's conservation officer can say which case yours is, and getting that answer in writing before the work is booked saves an argument later. For a house in a conservation area, ask the council whether its rules touch the roofline. Herefordshire Council lists 64 conservation areas, so check the council's list for your street or village before you plan a change to the front of the house.

You will find more on roofline work on listed houses in our guide to roofline work on listed buildings, and the guttering, soffits and fascias overview ties the pieces together.

What the choice does to the price

For whole-house gutter replacement, MyJobQuote averages £1,000 to £1,600 across the UK, and it gives £40 to £50 per metre for plain uPVC. Those are averages, with no word on profile, so they do not tell you which shape costs more. Profile affects the price because corners and fittings are shaped differently, and because some period patterns are made in smaller runs.

One written total follows the survey. It names the profile, the material, the eaves height and the access, and it states whether the boards behind the run are part of the plan. Ask for the same detail from any other firm, because a quote that says only 'gutters' leaves too much to chance.

One uPVC roofline retailer, who has a stake in the claim, says its boards "can typically maintain reliable performance for between 20 and 40 years". Treat that as a seller's range for boards and not for gutters. Where the present gutters are grey, old and possibly asbestos cement, HSE advises assuming asbestos in a building built or refurbished before 2000, so nothing is drilled or broken until the material is known.

Related questions

Can I fit square gutters onto half-round brackets?

No. Brackets are made for one profile, and a square channel will not seat in a bracket made for a curve. When the shape changes, the brackets change with it, and so do the corners, unions and outlets. The survey counts all of them before the quote is written.

Which profile suits a listed cottage?

The one it already has, or was built with. A change needs consent, from the council in England under the 1990 Act and in Wales under the 2023 Act, so we ask the conservation officer first. A like-for-like repair may need no consent, but ask the council to confirm.

Get your free roof quote

Tell us about the roof and we will arrange a survey.

10-year workmanship guarantee, in writing