01432 610152 Get a quote Call 01432 610152

Iron or plastic

Cast iron or uPVC gutters for a period house?

For a period house the answer starts with the house itself: its age, its listing and the gutter already on the wall. Both materials have a place.

Short answer

Cast iron suits a house that was built with it, and it can be repaired where it hangs. uPVC suits a plainer, later house where a light run that never needs painting is wanted. On a listed building the material is a consent question in both nations, so the council is asked before a change is priced. We photograph the run so the choice rests on what is really on your wall.

How each material behaves on an old wall

Cast iron is heavy, rigid and made in short lengths bolted together at flanged joints. It needs paint to stay sound, and it rusts from the inside, where leaves and silt hold a little water for weeks. A cracked section can be swapped for a new length in the same profile, and a weeping joint can be opened, cleaned and resealed. That is why a long run of old iron can be worth keeping.

uPVC is light, quick to fit and never needs painting. It clips together with rubber-sealed joints, moves a little as the weather changes and can be renewed one fitting at a time. One uPVC fascia seller, a party with a stake in the answer, says its boards "can typically maintain reliable performance for between 20 and 40 years". That is a claim about roofline boards, not about iron.

Iron and uPVC side by side
PointCast ironuPVC
Weight on the wallHeavy, needs sound bracketsLight
UpkeepRepaintingWashing and clearing
A failed sectionRepair, or a matching lengthReplace the fitting
Profile choiceMatches old patternsFewer period shapes

Listed and protected houses: who decides

If the house is listed, swapping the material of a gutter can alter its character, and that is where consent comes in. Consent follows a different statute in each nation:

  • In England, the Planning (Listed Buildings and Conservation Areas) Act 1990 s7 makes works that touch a listed building's character subject to consent, unless they are authorised. A change of gutter material can be such a work.
  • In Wales, the Historic Environment (Wales) Act 2023 s88, in force since 4 November 2024, says listed building works must be authorised, and s89 provides for listed building consent.

Repairing what is there is a separate matter from changing its material. The council's conservation officer is the right person to ask about either, and their reply in writing belongs with the deeds. For a house in a conservation area, check with the council before committing. Herefordshire Council lists 64 conservation areas, from hamlets to Hereford's historic centre, so check your street first.

Our guide to roofline work on listed buildings goes further, and the page on cast iron gutters on period homes looks at the iron side in detail.

What moves the price of iron against plastic

For a whole-house replacement, MyJobQuote averages £1,000 to £1,600 in the UK, and gives £40 to £50 per metre for standard uPVC. Those are third-party averages for plastic. Iron is priced on its own terms, because the sum swings with the profile, the length of run and how much of the old metal can stay on the wall.

What shapes a written price on a period house:

  • how many lengths of the existing iron are sound enough to keep
  • the pattern of the profile, and whether it must match a neighbour
  • how high the eaves are, and whether ladders or scaffold are needed
  • the fascia boards behind the run, which may need work first
  • the number of downpipes, hoppers and awkward corners, since each one is a joint to make good

What we send you is a single written total, set after the gutters have been inspected up close. Where mending the iron makes more sense than renewing it, that is what we advise, even though renewal is the bigger job. When the run is thin throughout, the photographs of the metal show why renewing it is sensible, and you can judge for yourself.

Is the old gutter really iron?

Not every old grey gutter is iron. A magnet that grips firmly and orange rust that blooms through the paint both point to iron or steel. A matt grey, chalky channel with a fibrous break may be asbestos cement, and HSE names rainwater goods among the places to look. Its advice, for buildings erected or refurbished before 2000, is to assume asbestos is in it somewhere, which makes a sample the sensible next step for any suspect length of grey channel.

Only a laboratory can name the material. Until it has done so, do not drill, scrub or break the gutter, and let us know before the survey. HSE puts careful, unbroken removal of asbestos cement in its non-licensed group. The waste differs by nation: in England the household exemption leaves out asbestos waste, while in Wales NRW says contractors need consignment notes to move asbestos from a home.

Once the material is known, the choice becomes a question of looks, upkeep and budget. The half-round or square gutters page covers profile, and the guttering, soffits and fascias overview covers the rest of the roofline.

Related questions

Does uPVC last as long as cast iron?

The two are not measured the same way. One uPVC roofline retailer says its boards can typically perform for 20 to 40 years. Iron has no such range to quote, and its life depends on paint and on whether failing lengths are replaced one at a time. The survey records the state of each length.

Can iron downpipes be used with plastic gutters?

They can be joined with the right adaptors, though the mix looks uneven on an old front wall. On a listed house a mixed run is a consent matter in England under the 1990 Act and in Wales under the 2023 Act, so we ask the council before we price it.

Get your free roof quote

Tell us about the roof and we will arrange a survey.

10-year workmanship guarantee, in writing