In brief
MyJobQuote (page dated 20/10/26) says that in 2026 a flat roof replacement averages between £1,500 and £6,000. Which?'s November 2025 survey gives £1,400 to £3,500 for a felt roof on a garage of 6 m by 3 m, and £1,950 to £4,000 for new boards with a modern covering, ex VAT. These are national figures from third parties, not our prices. Size, deck, insulation and access decide the real total.
What the published figures say, and what they describe
Two third-party sources give figures for replacing a flat roof, and they measure different things, so each is named with its date.
| Source | What it covers | Figure |
|---|---|---|
| MyJobQuote, 20/10/26 | Flat roof replacement, 2026 average | £1,500 to £6,000 |
| Which?, Nov 2025 | Felt roof, single garage, ex VAT | £1,400 to £3,500 |
| Which?, Nov 2025 | New boards and PVC or EPDM, single garage, ex VAT | £1,950 to £4,000 |
The Which? lines are for one garage measuring 6 m by 3 m, with labour and materials included. MyJobQuote states no size or covering for its range, and no basis for VAT. MyJobQuote's separate rubber roofing page (09/10/26) gives an average of around £1,050 in the UK.
Not one of these is a Hereford price or ours. They give the scale of the job, which is useful when a first quote lands and you want to know whether it sits in a sensible band, but they cannot replace a survey of your own roof, and no figure here has been multiplied or adjusted to suit. The flat roofing hub explains the coverings behind the numbers.
Why the range is so wide
An average spread from £1,500 to £6,000 contains roofs that have little in common. A survey records the things that separate them:
- the area, and the number of corners, upturns and outlets to be detailed
- the covering chosen, since felt, rubber and GRP are different products with different lives
- how sound the deck is, and whether boards need renewing
- whether insulation is being added, and whether the roof becomes a warm deck
- the route to the roof, and whether scaffold is called for
- what is being taken off and carried away
Which? says the final cost depends on access, and its own two lines show how much a renewed deck and another covering add to a garage roof. A larger extension roof, or one with a rooflight or a parapet, starts higher before any of the other items come in.
Some flat roofs do not need replacing at all. A single clean split on a young roof is a repair, and the page on patching or replacing a flat roof sets out how that is judged. Where renewal is the sounder choice, the photographs taken on the survey make the case, and you see the same evidence we do before anything is decided.
Years for the money: published lifespans
A price is only half of a comparison, so here are the lifespans two guides publish. Both are ranges and neither is a promise. Where the two disagree, both are given, since neither guide has an answer that settles it.
| Covering | HomeBuilding | Less |
|---|---|---|
| Felt | 10-15 years | 10 to 20 years |
| EPDM | 25-30 years | 30 to 50 years |
| GRP | 25-30 years | 25 to 40 years |
HomeBuilding's figures are from its guide updated on 30 September 2025, and Less updated its flat roof page on 27 October 2026. Less ties the felt range to quality and installation, which is true of the other coverings too: a poorly detailed rubber roof will not reach the top of its range.
Lead is a further option for small flat roofs. HomeBuilding gives a lead flat roof 60-100 years and Less gives 50 to 100 years, both well above the others, and neither guide ties that to the price of lead, which is set after a survey.
The page on how long EPDM lasts goes into why its two ranges differ.
Approval, insulation and the written total
A replacement is a larger step than a repair, and the rules follow the border. For England, the Planning Portal's test is less than 25 per cent of the building envelope and less than 50 per cent of the roof affected, with weight rising by 15 per cent or more a separate trigger. In England, Approved Document L treats a replaced flat roof covering as renovation, so Table 4.3's threshold of 0.35 and improved 0.16 W/m²K come into play.
For Wales, the Welsh Government says that re-roofing in most situations needs Building Regulations approval, and that renewing a flat roof with its insulation within the build-up can call for that element to be improved. The Welsh Approved Document L, Table 11.1, sets 0.16 W/m²K, with 0.35 as the worst figure where 0.16 is not feasible.
We confirm the position with the council's building control service or a registered building control approver before a date is set.
The quote you receive is one total in writing, drawn up after the survey, with the covering, the insulation and the edge details described in it. Before comparing it with another, find out whether VAT is added and whether the total takes in scaffold.
