Short answer
Dark streaks running down a slope are algae: a film of single-celled organisms that settles wherever the surface stays damp and collects a little dust. It follows the line the water takes, which is why the stain forms in stripes below a ridge, a chimney or a leaking gutter joint. The growth is treated with a biocide, and we look for the source of the damp as well.
What the dark streaks on a roof are
Algae is the organism behind most roof streaks that are black, dark green or brown. It is a thin film, with no thickness you can lift, so it reads as a stain rather than a mat. That separates it from moss, which forms raised cushions, and from lichen, which sits on the surface as a tight grey, yellow or orange crust.
From the garden, the three look different:
| Appearance | Likely meaning |
|---|---|
| Flat dark stripes | Algae along a line of running water |
| Raised green or brown cushions | Moss holding damp in a sheltered spot |
| Grey or orange crust | Lichen, slow to form, sitting tight to the face |
One tile can carry all three together, so the survey looks closely before any treatment is chosen. Our guide to lichen, algae and moss shows how each is handled on tile, slate and stone. Streaks are the easiest of the three to spot from the lawn, and the hardest to judge from there, because a stain and a failing surface can look alike in the wrong light.
Why the streaks form in lines down one slope
Algae needs a damp surface and a trace of organic dust to feed on, and a roof supplies both along the paths the water takes. Rain runs off a ridge, a chimney or a dormer cheek in a narrow band, so the same band stays damp for longer and the algae spreads down it. Shade slows the drying, and a slope the sun reaches late holds the damp for longer than one in full light. Our answer on why moss grows on the north side covers the effect of aspect.
The source of a stripe is worth finding, because treating the streak and leaving the source means it returns. Look above the stain for:
- a gutter joint or stop end that spills onto the roof edge
- a flashing that sheds water onto one line
- a chimney or dormer that throws rain into a narrow band
- a branch that drips onto the same tiles in every shower
A stripe that begins exactly under one of these has a cause you can deal with, and the survey photographs mark the point where it starts, so that you can see for yourself where the water is coming from.
Taking streaks off without harming the covering
Algae is not lifted off like a moss cushion. It is killed with a biocide, a treatment made to kill moss, lichen and algae, applied at low pressure, and the dead film weathers away over the following seasons. Any thicker growth in the streak is lifted off by hand first. The roof looks the same on the afternoon of the work and cleaner as the months pass, and you are told to expect that before the work begins.
A high pressure jet is not part of this. Marley, the tile maker, says that "The use of high powered jet washes is not recommended as it can damage the surface of the slate or tile", which would cut the expected life of the covering. Our guide to what soft washing means sets out the steps.
For the published price range, Checkatrade's April 2026 guide says UK roof cleaning typically costs between £8.50 and £14 per m², and a hand-removal plus biocide line of around £11.50 per m². Those are rates per m², not totals. Our quote names the method and is one written total, and the roof cleaning and moss removal page sets out the full service.
When streaks point to something else
Not every dark stripe is growth. A rust-brown stain can come from a corroding fixing, and a pale streak below lead can be a deposit from the metal. A stripe that still looks wet in dry weather can mean a leaking joint above it. The survey tells these apart before anything is sprayed, because treating a stain that is not growth achieves nothing.
The covering matters as well. If the surface under a streak is flaking, laminating or soft, the roof needs a repair first, and the streak is a minor part of the picture.
A listed house needs a word with the council before any method is agreed, because the method chosen for the roof can matter to the consent position. In England, listed building control rests on section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990. In Wales, the Historic Environment (Wales) Act 2023, sections 88 and 89, has applied since 4 November 2024. A conservation area or National Park raises planning questions only if the work ends with replacement materials, and the planning authority for your address can say.
