01432 610152 Get a quote Call 01432 610152

Membrane renovation

Is a new flat roof membrane a renovation?

Putting a fresh waterproof layer across a flat roof counts as renovation in the energy rules, wherever in the borders the house stands.

Short answer

Yes. England's Approved Document L (2021 edition) names a replaced flat-roof waterproof membrane as renovation, and Wales does the same in paragraph 11.16 of its own document. Because a roof is a thermal element, the insulation target comes into the job. The aim is 0.16 on both sides of the border, with a different fall-back figure in each country.

Why a new membrane triggers the energy rules

In regulation 2 of the Building Regulations 2010, a thermal element means walls, floors and roofs. Glazed openings, including roof windows and rooflights, and ordinary doors are left out. A flat roof is therefore a thermal element, and the membrane is simply the part of it that keeps the rain out.

Part L, the section of the Regulations dealing with fuel and power, treats replacement of a layer of such an element as renovation. Both countries spell this out for flat roofs. The English document's examples of renovation include re-laying the waterproof layer on a flat roof. The Welsh document, in paragraph 11.16, counts the replacement of an existing layer, and gives the membrane of a flat roof as one case.

The consequence is easy to miss. Someone who sees the job as a fresh coat of waterproofing can learn that the insulation below it is now part of the discussion, because the whole roof is the element being renovated. That is why we raise it during the survey, well before any old covering is lifted, and why a question about lifespan so can turn into a question about insulation. An ageing covering and thin insulation can both turn up on one survey, so it helps to settle both together.

England: Table 4.3 and its payback fall-back

For England, Table 4.3 of the 2021 edition gives a roof threshold of 0.35 and an improved value of 0.16 W/(m²·K). An existing roof that falls short of the threshold should reach 0.16 once it is renovated.

Paragraph 4.13 provides a way out. If 0.16 cannot be achieved technically or functionally, or would take longer than 15 years to repay in simple terms, the roof goes to the lowest value that is feasible and repays within that time. The text adds a general limit: once upgraded, an element should not usually be worse than 0.7.

  • Dates: AD L 2026 takes effect in England on 24 March 2027 for ordinary work outside the higher-risk category, with the tables renumbered 3.2 and 3.3 and the payback rule at paragraph 3.14. The 2021 tables apply until then.
  • Approval: the Planning Portal sets its no-application test at under 25 per cent of the building envelope and under 50 per cent of the roof.

A full renewal of a flat roof may go past that second limit, so we ask building control at the start.

Wales: Table 11.1 and the 50 per cent test

In Wales, the Welsh Approved Document L (2022 edition with 2024 amendments) puts its renovation standards in Table 11.1. A flat roof, or any roof with its insulation built in, gets two columns: (a) is 0.16 and (b) is 0.35. Column (b) is the worst figure that will do when 0.16 cannot be reached for economic, functional or technical reasons. It is not a trigger, which is the usual mix-up with England.

The trigger is in paragraph 11.14: the whole element is improved when more than 50% of its surface is being renovated. Paragraphs 11.20 and 11.21 add a relaxation judged against payback of the initial cost within 15 years through energy savings.

gov.wales also tells readers that minor flat-roof repairs may need no application, while a roof whose insulation is built into it may be asked to improve that insulation when replaced. The Welsh successor to the document begins on 4 March 2027, and the Welsh Government's reformed building control process started on 1 July 2026.

So one job meets two sets of numbers, and the postcode picks the set.

Both countries side by side, and what we do

Part L figures for a renovated flat roof
PointEnglandWales
Where it sitsTable 4.3Table 11.1
Target value0.160.16
Fall-backLowest feasible, 15-year payback, generally not above 0.7Not worse than 0.35
Next edition24 March 20274 March 2027

On the survey visit we photograph the existing build-up wherever it is exposed, such as at an edge or an outlet, and tell you what the roof appears to contain. The council's building control service, or a registered building control approver, then confirms which route fits your address. Our written price afterwards is a single total, with scaffold allowed for and the rubbish carted off. Should building control's reply change what the roof needs, you hear before any work begins, and our pictures of the build-up explain the reason. Ask for them at the survey if you want to keep a record.

Two neighbouring pages help from here. How long EPDM lasts deals with the lifespan question that can start the conversation, and replacing flat roof insulation rules goes deeper on the insulation. Everything else on this topic is gathered under flat roofing.

Related questions

Does patching a small area of membrane count as renovation too?

The listed case is replacement of the waterproof layer, meaning the layer as a whole, not a patch. A small repair is a different job, and gov.wales notes that minor flat-roof repairs may need none. For anything sizeable we photograph the area and ask building control before we start.

Do I have to follow the 2026 edition of Part L now?

No. In England, AD L 2026 takes effect on 24 March 2027, so the 2021 edition applies until then. In Wales, the successor document takes effect on 4 March 2027. Which edition governs a job turns on its date and its country, and building control can confirm it.

Get your free roof quote

Tell us about the roof and we will arrange a survey.

10-year workmanship guarantee, in writing