01432 610152 Get a quote Call 01432 610152

Roofline costs

What does it cost to replace fascias, soffits and guttering?

Published prices for guttering and roofline work exist, and they are national, dated and wide. This guide sets them out with their sources, then explains what pushes a total up or down.

Horizon Roofing Hereford 9 min read

Anyone searching for the price of new fascias, soffits and guttering meets a spread of numbers that do not agree. That is not carelessness on the part of the guides. Roofline work is measured in metres of board and gutter, and the length changes with every house, so any average is covering a lot of different jobs.

The figures in this guide come from two published sources, Which? and MyJobQuote, each with its date. They are typical UK ranges. None is a Herefordshire price and none is a Horizon price, so read them as a sense of scale before you ask anyone to look at your house.

The guide then turns to what changes a total: the length and height of the run, what is behind the boards, whether capping is possible, the scaffold and its licence, and whether the soffits hold asbestos. It finishes with how to read the quote you are given. Where a rule matters, such as a scaffold licence fee, it is labelled with the council that sets it, because England and Wales do not share one scheme and the units differ from council to council.

Published ranges, with their sources and dates

Two sources give figures for this work. Which? gathered its prices from a survey of 11 Which? Trusted Traders in November 2025, and its prices exclude VAT. MyJobQuote dates each of its cost pages and gives no VAT basis for its figures, so they are shown here exactly as published, without a VAT label.

Published UK ranges for guttering and roofline work
WorkPublished rangeWhere it comes from
Replacing gutteringAn average of £1,000 to £1,600MyJobQuote, October 2026
Standard uPVC gutterAround £40 to £50 per metreMyJobQuote, October 2026
Capping fascias and soffitsAround £800MyJobQuote, September 2026
Clearing all gutters, front and back£75-£350Which?, November 2025, excluding VAT

The per-metre figure is one to quote as it stands. It is a rate for guttering, not for a house, and it is not converted into a total here, as nobody can know your length of run from this page.

Each row is a typical UK range, drawn from many jobs on many kinds of house, so treat a single row as a marker and not as an estimate. The last row is for clearing, not replacing. It is there because a gutter that spills over should be cleared first, and a clear gutter that still spills has a fault in its fall or its joints. A clearing visit is therefore a cheap way to learn whether the gutters need replacing at all, and it separates a blockage from a fault in the run.

What moves the total up or down

Because roofline work is priced by the run, the first driver is plain length, counted in metres of board and gutter. A bungalow with a single plain frontage and a rear lean-to carries far fewer metres than a detached house with a bay, a porch and a gable returning along the side. Height comes next. A single-storey run can be reached from a low platform, and a three-storey elevation calls for a full scaffold.

Then come the things you cannot see from the lawn:

  • The condition of the timber behind the fascia, since sound rafter ends allow a simple job and rotten ones add repair work
  • The type of material chosen for the new boards and gutters, since uPVC, aluminium and cast iron all differ in what they cost to supply and fit, and cast iron on a period house may be a matter of consent
  • The number of corners, stop ends, outlets and downpipes, because each fitting adds work
  • Whether the old gutters have been fitted with the correct fall, or have to be reset
  • Whether the soffits are asbestos insulating board
  • How awkward the work is to reach, for example a conservatory or lean-to beneath the eaves

None of these has a published price of its own, and that is why a good quote starts with a survey. We photograph the run and the timber behind it where it can be seen, and you can see what we are pricing.

Brett Martin, a gutter manufacturer, says the fall on a gutter should be "1mm for every 600mm". A run laid flat or backwards holds water however new the plastic is, and putting it right is part of the job, not an extra to hope for.

Capping or replacing: the choice that shifts the price

Capping fits new uPVC over the faces of the existing boards instead of removing them, which leaves the old timber in place under the plastic. On its page of 17 September 2026, MyJobQuote gives capping fascias and soffits at around £800 as an average. A full replacement takes the old boards away and fits new ones to the rafter ends, which is a bigger job, so the price runs higher.

Capping suits boards whose timber is sound underneath. It is the wrong answer where the board is rotten (and on a listed house, boards and gutters can be part of what the council protects), because plastic over wet wood hides the problem and the wood goes on rotting out of sight. We tell you which one the roofline needs, and show the timber in the photographs.

If you are weighing the two, check these points with whoever is quoting:

  1. Has the timber been inspected, and can you see it in photographs?
  2. Are the soffits being capped, replaced, or left?
  3. Is the gutter being taken down and refitted, or replaced as part of the price?
  4. What happens to the ventilation at the eaves?

Our guide to capping or replacing fascias goes further,, which sets out how the choice is made.

If the roof itself is due for re-covering, the roofline is best done with it. That is a question of access and scaffold more than of materials, and it is explained in our answer on replacing fascias with a new roof.

Scaffold and the licence for it

Roofline work above single-storey height normally needs scaffold, and the written quote says whether scaffold is included. We include it in the one total price.

If the scaffold for new guttering has to stand on the footway in front of a terrace, the Highways Act 1980 section 169 requires a scaffold licence. We arrange the licence with our scaffolder. The council that issues it sets the fee, and each council counts in its own unit, so the figures below should never be compared directly.

Fees charged by each council for a scaffold licence, in that council's own unit
CouncilFee and unit
Herefordshire (England)£167, maximum of 1 month, then £123 per month; at least 10 days' notice
Worcestershire County Council (England)£85 per week, then £65 for subsequent weeks
Gloucestershire County Council (England)£145, minimum 28 days, then £36 per 7 days
Shropshire Council (England)£200, with no period stated
Monmouthshire (Wales)An administration fee of £108, and £27 per week to extend

The notice each council asks for differs as well: at least 10 days in Herefordshire, at least twelve calendar days in Gloucestershire, at least ten working days in Shropshire and at least 5 working days in Monmouthshire. The licence has to exist first, and the start date is set around it. For a Powys address, ask the council what it charges now and how much notice it needs. Scaffold hire sits inside the written quote, so no separate hire price is shown here.

When the soffit holds asbestos

Asbestos changes both the work and the price. HSE says: "If the building was built or refurbished before 2000, assume that there is asbestos in it." White soffit panels under the eaves of such a house are on HSE's list of places where asbestos insulating board (AIB) is found.

The consequences are practical:

  • Taking out AIB is mostly licensed work, handled by a specialist asbestos firm and not by a roofer.
  • Asbestos cement, as used in some roof sheeting and rainwater goods, can be handled without a licence if it is taken off carefully without breaking it up.
  • The waste needs the right carriage and the right skip: HSE asks for a lockable skip when asbestos is carried.

Paperwork depends on the country. In England the household exemption from hazardous-waste consignment notes is for waste "other than asbestos waste". In Wales, Natural Resources Wales says "contractors moving asbestos from a domestic property will need to use consignment notes", and a Welsh waste carrier registers with Natural Resources Wales.

MyJobQuote has a figure of around £2,750 for removing asbestos from a roof, but that is for roof sheeting and not for soffits, so we do not apply it here. A quote for a roofline on an older house should say what has been done to identify the soffit boards before anyone fits new ones.

Our guide to asbestos soffits explains what happens next.

Reading the quote you are given

A quote for roofline work is easy to read when it answers the right questions, whoever has written it. The test is whether you could explain to a neighbour exactly what is being done to your house and what you are paying in total.

Look for these points on any quote you are given:

  • Whether the total includes VAT, and whether the scaffold is included
  • The materials named, such as uPVC fascia and soffit boards and the gutter profile
  • How many metres of gutter and board the job covers
  • Whether the old boards, gutters and waste are being taken away
  • What is said about the timber behind the boards and about ventilation at the eaves
  • For a house from before 2000, what has been done to identify the soffits

Ours is a single written total price that follows the survey. It comes with pictures of the timber and the gutters on your own house, and at the end of the work the area is cleared and the rubbish carted off. The figures in this guide give you a range to hold the number against. They do not stand in for a survey of your own roofline, since Herefordshire houses differ so much in how they meet the roof at the eaves.

Gutters can be priced on their own, for anyone who only wants the gutters looked at.

The hub for all of this work is guttering, soffits and fascias.

Questions about the price

Do the ranges above include VAT?

Which? says its prices exclude VAT. MyJobQuote gives no VAT basis, so nobody can tell from the page whether its figures include it or leave it out. On any quote you receive, check that it states whether VAT is included, and whether the scaffold is.

Does it make sense to do gutters and fascias in one visit?

Yes, because the gutter hangs on the fascia and has to come down while the board is changed. One scaffold then serves both jobs, and the gutter can be refitted to a fall set against the new boards, or swapped for a new run if the old one is cracked.

How much fall should new guttering have?

Brett Martin, a gutter maker, gives "1mm for every 600mm". That is a gentle slope, which brackets set far apart, or one screwed to a board that has shifted, can easily cancel out. We check the fall and set the run out before any gutter is fixed to the board.

Get your free roof quote

Tell us about the roof and we will arrange a survey.

10-year workmanship guarantee, in writing