01432 610152 Get a quote Call 01432 610152

Concrete tile cleaning

Can concrete tiles be cleaned safely?

Yes. Concrete tiles are cleaned safely with hand removal, a soft brush and a biocide, after a survey that finds any loose or cracked tile first.

Short answer

Yes, when the method is matched to the tile. Moss is lifted off by hand, loose growth is brushed down the slope, and a biocide is applied at low pressure to kill what is left in the joints. Before any of that, the survey notes cracked tiles, worn nibs and crumbling ridge bedding, because a tile that is already failing should be repaired rather than scrubbed. A high-powered jet wash is not recommended by Marley.

What we check on concrete tiles before cleaning

A concrete tile is hard, but it is also brittle, and its weak points are small ones. Each tile hangs on a nib, the lip on its back edge that hooks over the batten, the timber strip across the rafters. A tile whose nib has snapped can slide, and a hand pushing down a slope can move it further. So the survey comes first, and the photographs go to you.

On your roof we look at:

  • cracked or chipped tiles, especially along the lower edge
  • tiles that have shifted or sit proud of their neighbours
  • ridge tiles that rock, and the state of the mortar beneath them
  • verge tiles and their cement fillets at the gable edge
  • moss packed into the laps, where the tiles overlap

Anything found is explained on the ground before the clean starts, with the photograph beside the explanation, so you see the cracked tile or the rocking ridge for yourself and not just a description of it. A loose ridge tile is a repair, and our guide to moss removal methods explains why a roofer does not scrub across bedding that is already soft. Where several tiles are cracked on one slope, the survey weighs a patch repair against a larger job with you, using the photographs.

The method that suits a concrete tile

The order is gentle first. Thick moss is lifted away by hand, starting at the ridge. Loose and dry growth is then brushed along the fall of the slope, the way the tiles overlap, because a brush pushed upwards can catch a tile edge. What remains in the laps is treated with a biocide at low pressure, and the dead growth weathers away afterwards.

Marley, the tile maker, says "The use of high powered jet washes is not recommended as it can damage the surface of the slate or tile, thus reducing its expected life considerably". The warning reads "slate or tile", so it covers concrete as well, and the work uses hand tools, brushes and low-pressure application instead. Our answer on whether you can jet wash a roof explains why not.

The gutters are cleared as the last step, and the waste is bagged and taken away. The ground is left tidy, and a second set of photographs is taken from the survey positions, so the roof can be compared before and after the work.

How long concrete tiles last, and what cleaning does

Published lifespans for concrete tiles differ, so here are both. Marley gives "around 60 years". HomeBuilding says 40 to 50 years for plain concrete tiles. Both describe a covering that is sound and looked after, as typical ranges and not promises about any one roof.

Cleaning strips away the growth and shows you the tile underneath. It does not add years, and it is not a repair. A clean that reveals a flaking face or a slope of failing tiles has done something useful, because you learn that sooner and can weigh a repair against a re-roof with photographs to hand.

Published repair rates give an idea of scale. Checkatrade's June 2026 guide, excluding VAT, gives concrete tile repairs at £90 to £120 per m², on patches of up to 3 m². That is a rate per m², not a total for a roof, and nobody should turn it into one by guessing at the area. The price we send is written as one total and names the method used. Our roof cleaning and moss removal service begins with that survey for every roof.

If the tiles are worn: the rules on re-covering

Sometimes the survey shows a roof that a clean cannot save, and replacement is handled differently in each country.

  • England, Planning Portal: normally no application where under 25 per cent of the total building envelope and under 50 per cent of the roof is affected.
  • England, Planning Portal: approval where the weight of the roof covering goes up by 15 per cent or more with a new material.
  • Wales, Welsh Government: Building Regulations approval in most situations, and slate to tiles is the page's own illustration of a swap likely to need it.

Weight is a matter for a structural check, because it depends on the exact tile or slate chosen.

None of this applies to a clean as such. It matters if the clean leads you towards a re-roof, and the photographs taken during it are what you would show a building control body. In a conservation area or a National Park, ask the planning authority as well. The two published lifespans are far apart, so the clean is best treated as a chance to look at the covering properly and not only as a cosmetic job.

Related questions

Is it safe to walk on concrete tiles to clean them?

Concrete tiles are brittle, and a boot placed on a worn edge or an unsupported tile can crack it. Weight is spread with roof ladders or boards where it is needed, and work is done from the safest position the survey finds. A tile that rocks is marked on the survey and avoided.

Do concrete tiles need a biocide after the moss is lifted?

The laps can still hold spores and fine growth, which a hand tool does not reach, so a biocide is applied at low pressure to deal with them. Whether it is worthwhile on your roof depends on how much growth is left, and the survey photographs show you.

Get your free roof quote

Tell us about the roof and we will arrange a survey.

10-year workmanship guarantee, in writing